8,192 virtual microphones
The HDL300 system’s Microphone Mist technology fills a room with 8,192 virtual microphones, so everyone can be heard in a meeting.
The HDL300 system has the key audio conferencing system elements in an integrated wall-mounted unit. You get the audio performance you need without desktop clutter or an expensive, intrusive installation of a mic array and speakers.
Runs at 15,000 MIPS – far exceeding the processing power in most traditional systems.
The processor drives 12 omnidirectional microphones to deploy 8,192 virtual microphones.
Two 20-watt speakers provide crisp sound for all your audio conferencing and playback needs.
Budget system with pickup limited to those seated at the conference table.
Higher-cost in-ceiling system with coverage limited to the areas within the beams.
Moderately priced virtual microphone system provides true full-room pickup.
Microsoft® Teams and Surface™ Hub, Skype® for Business, Intel Unite®, Zoom, Cisco WebEx™, Panopto, Matrox®, Dante®, GoToMeeting™, StarLeaf, BlueJeans and a range of other UC&C, conferencing and collaboration platforms are supported by the HDL300 system. And it’s recognized as a standard USB audio device so there are no drivers to install. Nice.
Unconventional room arrangements may challenge traditional systems, but the HDL300 system handles virtually any configuration.
Seated at the table or moving around the room, everyone can be heard with the HDL300 system.
Reconfigure your room as often as you like. The HDL300 system autocalibrates to suit almost any room or meeting style.
Excellence in Product Innovation – Trailblazing Innovation category. From the National Systems Contractors Association.
Best of ISE 2018 – Best Audio Conferencing Product. From rAVe Publications for the Nureva™ Dual HDL300 system.
Top New Technology – Unified Communication and Collaboration Audio Components. Presented at ISE 2018.
A virtual microphone is an individual “pickup point” created when two or more physical microphones (there are 12 in an HDL300 bar) work together, through proprietary processing algorithms, to focus their pickup patterns on a configurable zone. Thanks to advanced processing power, the HDL300’s Microphone Mist technology listens to each virtual microphone simultaneously, and chooses the predominant sounds and optimizes them for clear conversations.
When two people talk at the same time, the HDL300 system focuses on the stronger signal (the louder voice), while the other voice drops into the background. The effect is as if you were standing in the room close to the louder talker, but are also aware that someone else is speaking at the same time.
The system monitors and adjusts to the location of a person speaking 10 times per second.
Yes, but please note that many UC&C (unified communications and collaboration) systems do not provide optimal stereo performance.
No integration is required. The HDL300 system is recognized as a standard USB audio device. UC&C application controls (for volume and muting) work automatically with the HDL300 system.
The HDL300 system is quick and easy to install. It can take less than 30 minutes. The microphone and speaker bar hangs on the wall on two screws and connects to the breakout box via a PoE cable (included). The connect module can also be mounted on the wall, under a table or wherever is convenient. It is connected to a power source and to your computer via a USB cable (included).
The HDL300 system is very easy to deploy. It calibrates automatically at set up and constantly during use. The system senses and adjusts to changes in room characteristics automatically. No technician is required to set up or maintain the system.
The HDL300 system will work with any system that accepts clean, echo-canceled input for audio. The product supplies audio through USB or 3.5mm auxiliary in and out ports on the connect module.
The HDL300 system is currently available in North America, Europe, Australia and New Zealand. A detailed list of countries can be found here. We plan to expand to additional global markets in 2018.